how to change rotors (front)

[Rock]

Remove wheel and pull out spring with pointy nose pliers

http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs172.snc1/6450_115961101555_606111555_2636577_3834859_n.jpg
remove plastic covers on bolt boots and remove caliper bolts using a 7 mm hex head on a ratchet

http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs192.snc1/6450_115961106555_606111555_2636578_8048186_n.jpg

Remove caliper _some leverage might be required using a large screwdriver or bar- rotor should come right off- if it does not easily release..use a hammer to strike along the outer edges until it loosens itself...
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs172.snc1/6450_115961116555_606111555_2636580_4105331_n.jpg



Install your new rotor and place two wheel nuts to keep it still- meanwhile replace the brake caliper in reverse order to how you removed it.

http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs192.snc1/6450_115961146555_606111555_2636585_4498365_n.jpg

Tap spring in place with a hammer if required, use your pliers to get it in place first.
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs192.snc1/6450_115961156555_606111555_2636586_901526_n.jpg

while you are at it...give your brakes a good bleed-
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs192.snc1/6450_115961161555_606111555_2636587_5072108_n.jpg

[909OGO]

Great DIY there, thanks. :)