Aarony92
January 25th, 2012, 01:45 AM
Did this one today quick and easy fix takes about 5 minutes at the most. You'll probably need someone to hold the bonnet to align the strut as you mount it as its not easily compressable as it shouldn't be.
Part number is 8D0 823 359B Cost me $70 + $7 GST.
Basically there are 2 pins and clips attached to the top and bottom or the strut pull the clip out with pliers or something and the pin will slide out try not to drop these into the engine bay..
Do the reverse for the installation of the new one getting someone to raise or lower the bonnet to align the bracket with the hole in the strut for the top mount. And done!
Have a beer,
Part number is 8D0 823 359B Cost me $70 + $7 GST.
Basically there are 2 pins and clips attached to the top and bottom or the strut pull the clip out with pliers or something and the pin will slide out try not to drop these into the engine bay..
Do the reverse for the installation of the new one getting someone to raise or lower the bonnet to align the bracket with the hole in the strut for the top mount. And done!
Have a beer,