PDA

View Full Version : Front wheel bearing



juiced-tt
December 5th, 2015, 08:29 AM
Can anyone help tell me how to remove the front passenger side bearing? I have already removed the caliper, rotor, and inner break guard. Do I need to take off the control arm, or anything else? Thanks

Sent from my SPH-L720 using Tapatalk

juiced-tt
December 5th, 2015, 08:31 AM
Sorry it's for a 2005 audi tt 3.2l

Sent from my SPH-L720 using Tapatalk

Aussie Audi Guy
December 7th, 2015, 05:01 PM
Driveshaft has to come out, so 2 ways - either pop the ball joint out, or unbolt the ball joint. It's easiest to unbolt the big driveshaft bolt whilst you still have the brakes attached as it takes a heap of force.

Don't forget a wheel alignment & do everything up tight.

27litres
December 7th, 2015, 08:10 PM
If you can still put the car on the ground, I'd recommend doing that. Pop the wheel centre out first if it's still fitted as you'll need to access the centre bolt through the wheel with the cars weight on it.
If it's a hex head bolt it's probably 27mm. If it's an Allen key head it'll most likely be 17mm.
You'll need a breaker bar and mid extension to clear the wheel and probably some kind of extension bar for the breaker bar (or buy a big one!) - I use a length of galvanised water pipe to do mine!

You can try using a rattle gun - but I've never had success with one!

juiced-tt
December 9th, 2015, 06:32 AM
Thanks we got it fixed and she is running smooth as ever :)

Sent from my SPH-L720 using Tapatalk