View Full Version : Makeshift audi fuel pump removal tool

April 24th, 2016, 11:56 AM
Hi guys,

Just wanted help out all you out there trying to remove audi fuel pumps from there basket.

I have just done this today again but this time only took me 10min that's including making the tool.

All you need to get is a piece of downpipe 100mm can get it from anywhere i had a piece left from work i was doing awhile ago. Place on top of pump assembly and mark out the 4 slots on top of the pump, I only marked 3 still worked, cut them approx 15mm deep. Once that is done grab a pair of pliers and bend back the tabs you have just cut just a little otherwise they will break, the pipe should fit inside the pump assembly (After taking off the top part of the pump with the hose and connector)and tabs outside, then all you do is twist on or off!

I was going to make a handle with 2 screws on either end with a piece of round timber for it when I get a longer piece of pipe for next time.

Hope this helps some of you out there!

Sorry I'll get a better photo up soon.....


Sent from my SM-P350 using Tapatalk