Search:

I don't believe believe the test circuit is correct. What is drawn would work but that is not how the cluster is configured.The test circuit assumes that Pin 5 ans Pin 7 are connected across the...

Start the VCDS software and hit the Options button from there you can select comm ports. There is a test button to use to confirm the config. How many VIN for the VCDS, unlimited?

document (in German) online

This was posted by a member in an earlier post its all in German dated 2012 from what I can see. Just makes you realize how big the issue is. It will make you more...

The S4 uses the same model airbag as the A4, BAM-PT1-0593. I checked my S4 wheel currently fitted and it is 20/10/2000 dated. My original wheel is 2001 dated. I assume you S4 is a 1999 model? Best of...

I know you said it is a relatively new battery but has anyone actually done a load test on this battery? You say when it is cold it wont start, you charge the battery and it starts. Cold weather...

Avant, RHS behind the cover that houses the central locking pump there is a plug/socket that will disconnect the sensors. Easy to see once you remove the cover.

Make sure you crack the fill plugs before you drain the diff or gearbox otherwise you might be in deep do do. Sometimes they can be difficult to undo.

I'm running a non-resonated full Milltek system with 200 cell cats on my RS4. It suffers from a slight drone below 2000 RPM, nothing too annoying though.

You can always copy the Bin File from your existing cluster using VAG EEPROM Programmer or the like and then upload it to your new cluster, that doesn't sort your VCDS issue but at least you should...

Another video

https://youtu.be/3o3FqJ6vNLU

Colour MFA Video

https://youtu.be/3iJONikxkMA

Update.

I got the Boost working, you have to hardwire the signal from the MAP sensor Pin 4, or from the ECU connector, I did the latter, to the Cluster. I ended up using Pin 32 of the Grey...

Yes still good.

How do you find the head unit? DIS integration. I am looking for something for the S4, currently running Hi Res RSN-E but need to buy a Bluetooth unit, more dollars than what you paid for your whole...

Sounds like over sensitive electronics to me. If I understand you correctly even if lights are off, if the unit happens to see a .1 v fluctuation on the lighting circuit it then switches to night...