Haha I know the feeling!
Do you have it running yet?
I'm ready to buy it if you are ready to sell it, let me know!
Cheers,
ChrisFB_IMG_1542325879715.jpg
'99 Quattro, stroked 2L
Concept, tune and build by QMS
EFR 6758, Bosch 1000cc, E85 @7bar, Bosch 413 in 034 surge tank. VVT cam timing upgrade. Controls by Eurodyne boost manager, V8 MAF, LC1, EGT. JE 9:1, 13kg 2L Crank, 475gm rods, Ferrea , Dowel pin crank, IE tensioner, 034 Pheno Spacer, FX400 240mm x6, Apikol SMIC, Miltek 2.75 Koni coils, Stoptech BB, Powerslot Rear, SS lines, 034 G/b, Apikol Diff mounts, APR snub mount.
Haha I know the feeling!
Do you have it running yet?
I'm ready to buy it if you are ready to sell it, let me know!
Cheers,
ChrisFB_IMG_1542325879715.jpg
Can somebody pass me the fire extinguisher?
Its not even at my place, Its still in Launching place, I was going down to trailer it up to Sydney this week, but I dont have enough time, so its to be the following week,
I purchased a 3.5tonne 17ft galvanised tilting trailer just for this job, The previous owner is gracious enough to store it in his shed for 3 months now while I have been battling with time to go and get it.
I plan to get it running and registered ASAP, I want to daily it while I fit a 5cly to my Audi 80 quattro
Treated myself, and bought a new car.
IMG_0030.jpgIMG_0033.jpgIMG_0024.jpgIMG_0027.jpgIMG_0029.jpgIMG_0025.jpg
hang on , hang on- build plate says 1990?
Dumped the old fuel- left the oil in it- looks fresh enough, starts but not injecting Fuel post start up. it will run on occasionally for a few more sec. - some trouble shooting for next week (i did lift the airflow measure flapper thing but that doesnt help) it has a aftermarket immobiliser but i figured out how to get the fuel pump run and crank engine- so pretty sure its not that
'99 Quattro, stroked 2L
Concept, tune and build by QMS
EFR 6758, Bosch 1000cc, E85 @7bar, Bosch 413 in 034 surge tank. VVT cam timing upgrade. Controls by Eurodyne boost manager, V8 MAF, LC1, EGT. JE 9:1, 13kg 2L Crank, 475gm rods, Ferrea , Dowel pin crank, IE tensioner, 034 Pheno Spacer, FX400 240mm x6, Apikol SMIC, Miltek 2.75 Koni coils, Stoptech BB, Powerslot Rear, SS lines, 034 G/b, Apikol Diff mounts, APR snub mount.
She's a beaut mate. Very tidy.
What version of the Bosch mechanical injection does it run? K-jetronic?
The offer to buy still stands!
Can somebody pass me the fire extinguisher?
It looks like K-jetronic, did some quick research on how it all works, fairly straight forward, devised some tests for Monday, need to get it going so I can get it out of harms way, its a sitting duck where it is right now
(prying eyes from wifey!) I not sure of the answer when if she finds it and says WTF! where did that come from? kind of questions... I could say it belongs to Chris? you never know Chris, but dont get your hopes up, by the way that pic of a 90 few posts back, is that yours? looks great. It dawns on me now that some of these older Audiis had fantastic paint jobs, the red one has zero orange peel and Im pretty sure it all paint and no top coat clear. Thats some marvelous paint gun work, The 90 you have in that post above has the same deep paint (and colour) of my 94 Convertible, I thought that was a one off and had some paint work done but now I see its factory finish- WOW.
'99 Quattro, stroked 2L
Concept, tune and build by QMS
EFR 6758, Bosch 1000cc, E85 @7bar, Bosch 413 in 034 surge tank. VVT cam timing upgrade. Controls by Eurodyne boost manager, V8 MAF, LC1, EGT. JE 9:1, 13kg 2L Crank, 475gm rods, Ferrea , Dowel pin crank, IE tensioner, 034 Pheno Spacer, FX400 240mm x6, Apikol SMIC, Miltek 2.75 Koni coils, Stoptech BB, Powerslot Rear, SS lines, 034 G/b, Apikol Diff mounts, APR snub mount.
Finally got the 90 fwd going, turns out the return at the tank was completely blocked, and subsequent over pressure in the injector unit kept the fuel flow closed, ran a temp fuel line off the FPR return port directly to the filler cap and she kept going after firing up! , had to punch the inside of the port in the tank out with a hammer and steel rod! easy to bleed the brakes with my compressed air reg set at 5 psi- the brake reservoir isnt shot because it hasnt had uv exposure! had a really loud lifter tick (one only i think) but a double dose of MBL additive cleared that up within a minute, changed the oil and filter and had her round the block a couple of times. Ive now made room in the shed for her till I get her registered.
Tas_Audi (January 20th, 2019)
Current - 2007 B7 RS4 Avant, APR Stage 3, Milltek with Hi Flo Cats, GruppeM intake, Sachs Clutch, Factory Ceramics, JHM Shifter, RS6 FBSTW, AMI & Hi Res RSNE
Current - 2012 B8 A4, 2.0T Quattro Avant SLine
Current - 2001 B5 S4 Imola Yellow Avant
Current - 1989 B3 90 Quattro - 7A NA Engine, (Long Term Restoration Project)
Current - 1984 WR Ur Quattro