Results 1 to 4 of 4

Thread: Carbon Fibre Trim re-glue

  1. #1
    Join Date
    Apr 2009
    Location
    Perth
    Posts
    152
    Thanked: 2

    Default Carbon Fibre Trim re-glue

    My carbon fibre trim around the shifter is coming unstuck mostly because it appears the outside layers are shrinking and causing it to curl away from the console. I can force it back into place but it springs back so I'd need a pretty serious glue to hold it down. I can probably clamp it while it dries.

    Does anyone know what would be a good glue to use?

  2. #2
    Join Date
    Feb 1980
    Location
    Back in Sydney (again!)
    Posts
    5,178
    Thanked: 625

    Default

    Araldite is probably your best option.

    Sent from my SM-G985F using Tapatalk

  3. The Following User Says Thank You to jnrdavo For This Useful Post:

    Iwant1 (October 8th, 2021)

  4. #3
    Join Date
    Apr 2009
    Location
    Perth
    Posts
    152
    Thanked: 2

    Default

    If I apply a little heat from a heat gun will the Carbon fibre be a little softer and able to be moulded back into shape?

  5. #4
    Join Date
    Feb 1980
    Location
    Back in Sydney (again!)
    Posts
    5,178
    Thanked: 625

    Default

    I'm not sure on that one... risky, but might work...

    Sent from my SM-G985F using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •