Pm sent
Sent from my iPhone using Tapatalk
Hi All,
It is with great regret, but I am now putting up my RS4 for sale as an incomplete project.
The car has been fully stripped back to prepare for paint but I don't have the time to complete this mammoth task.
It is most likely going to be sold as parts.
If there is any interest out there, please send me a DM.
Some before and after photos below
Quick list of Mods
RS6 Hybrid turbos (billet TFSI wheels)
Loba Cams
Miltek 3" Down pipes and full exhaust
Bosch 413 Fuel Pump
Larger 630cc Injectors
Bilstein PSS9 Coilovers
H&R Swaybars Front & Rear
Re bushed with Polyurethane bushes
B7 Front Ceramics and callipers
B7 Rear Discs and callipers
Braided Hoses for brake lines
B7 Winged seat
B7 Gearbox, Drive shafts, Shifter and Weighted Gear knob
Custom Speed sensor and crank sensor to match B7 Gearbox
Devils Own Water/Meth Injection
MRC Front Mount Intercooler and Piping, Black option for factory look
MRC Custom Oil Cooler
MRC Inconel Manifolds
100mm Hitachi MAF, Silicon Intake pipe and Cone Filter (Modified Standard air box to look stock)
Rolled arches for larger Wheels and lowered suspension
Lower Compression with Thicker Head Gaskets and bolts (More boost J)
New water bottle (Most noticeable Upgrade, all B5 owners should do this)
20" S8 alloys
Brake Master Cylinder, ABS Module upgrade for larger callipers
Aerial Removed, roof smoothed out and internal power aerial fitted
Custom Touch screen Radio to replace Standard (Audi Logo installed)
Launch Control and Flat Shifting
Custom MRC Map
3.jpg5.jpg6.jpg
Pm sent
Sent from my iPhone using Tapatalk
Now: 2001 B6 A4 1.8TQ, 18" RS4 Wheels, Needs more boost....
Before:1995 black B5 1.8TQ, wetterauer chip 16psi, K03 Sport, N75J valve, GP clutch, No cat, Slammed on Deisel 19" rims
Now: 2001 B6 A4 1.8TQ, 18" RS4 Wheels, Needs more boost....
Before:1995 black B5 1.8TQ, wetterauer chip 16psi, K03 Sport, N75J valve, GP clutch, No cat, Slammed on Deisel 19" rims
Photos of parts available.
Seats1.jpgSeats2.jpgSeats3.jpgSeats4.jpgBrakes1.jpgBrakes2.jpgIconnelManifolds1.jpgIconnelManifolds3.jpg
RS4 B7 Winged Seats an rear, they have have wear on the drivers side bolsters 2K
RS4 B7 Ceramic Rotors and Calipers 3K
Custom made Inconel Tubular Manifolds and RS6 Hybrid turbos. Turbos have about 5k of use but should be reconditioned before use. 2K
Body1.jpgBody2.jpgTurbos.jpgWheels.jpgWheels.jpgSpekClutch2.jpgEngine1.jpg
RS4 B5 Body and panels 10K
20" S8 hard alloy wheels 1K
New SPEC clutch Clutch $500
B7 RS4 Gearbox 1k
RS4 B5 Engine 2K
Update:Engine, gearbox and front seats have been sold
Hi Peter
Sad to see your project coming to an end.
I'm interested in your brakes, rear seats and wheels. Also, if still available, interested in the Miltek exhaust, rear brakes, braided brake lines and, Bilsteins. Also your custom touch screen radio.
Please let me know if any of the above is still available.
All the best
Will
Hi Peter,
I sent you a PM with a few enquiries on the 25th Jan (5 weeks or so go) and haven't received a reply from you...
did you get the message/enquiry?
If so can you please reply to it, or should i re-post my enquiries here in this thread instead?
Ps- main item was rear brakes so please if you can check your messages from back then and get in touch (re this primarily, but the other items too if possible)
Last edited by old_skool; March 5th, 2023 at 10:26 PM.