• Welcome to ozAudi.com If this is your first visit, be sure to check out the Forums Rules by clicking the hyperlink.

    Note that you are required to register before you can post.

    If you experience a problem logging in, drop me an email to admin@ozAudi.com and I'll sort it out for you.

    To start viewing messages, select the forum that you want to visit from the selection below.

2015 audi a6 (4g) integrated heated seat retrofit using factory controls


New member

At the time of writing it is winter here in Melbourne, and lately there have been some cold zero degree mornings, with top temperatures only getting to around 9 degrees celsius on a couple of days recently. The snow has been falling on the mountains (yes we have been watching closely) and it’s nice to think that time spent out and about in the cold, windy, and wet weather will be rewarded each time you return to your car with comfortable, relaxing and warming seats. You know, that radiating warmth that you might get by putting a thick fleecy jacket on, fresh out of the dryer. Unless of course you don’t have integrated seat heating!

This 2015 Audi A6 4G has been fitted with our integrated heated seat solution with factory controls. In this case, the genuine controls are built into the climate control system, and have low, medium and high settings, indicated by the LED’s in the seat heating switches. The heated seats will automatically set themselves back to the medium setting after they have reached their peak temperature on the high setting.

We have taken some care to show the leather seats as it is an important but often forgotten factor when considering whether to have seat heating installed. We have a specialist upholsterer who integrates the heating elements into the seats, and who also ensures that the leather is placed tightly and securely back onto the seat without damage. If you have a look closely at the seats in the video, the leather is perfectly placed with no evidence whatsoever that the seats have ever been disassembled.

In terms of the electronics, we have (as always) added our special Autofidelity touch, with complete factory switching, and completely integrated wiring, so there is really nothing to see, other than the factory switches, and some beautifully finished leather seats.

When dealing with automotive electronics products, it is important to maintain the original characteristics and functionality of each vehicle, and that safety and aesthetic aspects are not compromised in any way. At Autofidelity, we call this integration. This solution is available for AUDI vehicles. For more integrated solutions, check out our AUDI solutions page.

For bookings and enquiries, please visit our contact page you can also check out our Facebook page, Twitter page, or visit our News page for more news and updates. Autofidelity is located at 26-28 Kilpa Road Moorabbin, Victoria Australia 3189, please click the link to access directions.
Hi, very interested in this product - I have just took ownership of a 2011 A5 sportback S-line with leather seats and would be interested in finding out how much this would cost to retro fit?
Hi Popeye,

Thanks for your enquiry.

For our integrated heated seat solution using the factory audi controls we would charge $2500 incl. GST . We would need the vehicle for two full days. To make it easier for you, we have a courtesy car that we can offer you for the two days free of charge. We just ask for it to be returned full of fuel on your way back in.

If you would like any further information or would like to book your car in please give us a call on 03 9555 7343.

Team Autofidelity