• Welcome to ozAudi.com If this is your first visit, be sure to check out the Forums Rules by clicking the hyperlink.

    Note that you are required to register before you can post.

    If you experience a problem logging in, drop me an email to admin@ozAudi.com and I'll sort it out for you.

    To start viewing messages, select the forum that you want to visit from the selection below.

A6 C7 windscreen camera image processing module

ptt102

New member
Hi.

Can someone tell me where is the windscreen image processing module on the aAustralian variant of A6 C7?

Thanks,
Zivko
 
The image processing module (J851) should be in the driver's footwell in a RHD C7.

Image1.jpg
 
My A6 C7 Nov 2011 manufacture has the Control Unit for the 360-degree camera system (image processing module) in the drivers footwell mounted in a plastic lunchbox, & a rectangular piece of foam in the space in front of that. There are what looks like 4 video lines feeding into this. Under the passengers footwell is the ACC & Brake Guard etc Image Processor mounted to alloy bracket which is attached attached to the floor. Behind that is the Night Vision Processing Module mounted in a plastic lunch box.
 

Attachments

  • ACC Image Processing unit.jpg
    ACC Image Processing unit.jpg
    1.2 MB · Views: 1
  • 360 Deg Camera Processing Module.jpg
    360 Deg Camera Processing Module.jpg
    789.6 KB · Views: 1
  • Night Vision Control Module.jpg
    Night Vision Control Module.jpg
    948.9 KB · Views: 1

ozAudi Sponsors

Back
Top